ASSEMBLEASSEMBLY INSTRUCTIONS FOR
T4 PLATFORM TROLLEY
Everything you need to know to help you get your new G-Rack platform trolley assembled and ready for use.
Read this guide thoroughly before starting to assemble your trolley and retain for future reference.
Before you get started, unpack carefully and check all components are present and correct.
Take care during assembly by following these instructions, and limiting any hazards by using caution.
Be careful during assembly, and when using it, particularly when lifting or stretching - or when using tools.
Make sure you're wearing appropriate clothing - protective gloves, and footwear are recommended.
Dispose of packaging materials responsibly.
CHECK LISTWhat you need
to build your rack
PART A Body x 1
PART B Wheels x 4
PART C Washers x 16
PART D Bolts x 16
on the build
STEP 1 Turn the trolley over, and remove the bolts (Part D) and washers (Part C) from the body.
STEP 2 Take one wheel (Part B), and push bolts (Parts D) through the corresponding holes in each corner.
STEP 3 Slide washers (Parts C) on to the bolts, and place in the corresponding space on the trolley body (Part A).
STEP 4 Secure bolts to corresponding holes on the underside of the trolley body (Part A), using a wrench to tighten the bolts if required.
STEP 5 Your truck is now complete. Flip the handle up for use.
Now your truck is built and ready to use, read the below carefully and ensure that all users are aware of the rules for safe use.
Never attempt to pack a load above the recommended weight capacity, or that you cannot handle; get help, or split the load.
Ensure you are in full control of the trolley when in movement at all times. Do not use the truck on the stairs.
If you have to move loads around corridors, then get somebody else to open fire doors for you.
Never intentionally create large loads when a number of small loads is a safer alternative
DON'T JUST TAKE
OUR WORD FOR IT...
You can read fantastic reviews on the full range of our products,
or check out our testimonials